Supported hardware
Compare the available hardware profiles below. To try Hermes Gadget without a board, start with the desktop simulator.
Hardware ports remain experimental until the verification table links a complete physical report for the exact model and revision. CI builds and simulator tests check software behavior; they do not verify physical hardware.
ESP32-S3 boards
| Board | Controls | Audio |
|---|---|---|
| M5Stack Cardputer ADV / Stamp-S3A | Hold G0 to talk; keyboard to type; Fn+Esc cancels; Fn+; / Fn+. scroll; Tab opens settings | Onboard ES8311 microphone and speaker. Experimental; ADV only |
| Waveshare ESP32-S3-LCD-1.54 | Hold BOOT to talk | Onboard microphones and speaker |
| Waveshare ESP32-S3-Touch-LCD-1.83 | Hold the screen or BOOT to talk; PWR turns the screen off and on | Onboard microphones and speaker. Experimental |
| Waveshare ESP32-S3-Touch-LCD-1.46 | Hold the screen or BOOT to talk | Onboard microphone and speaker. Experimental |
| Seeed Studio SenseCAP Watcher W1-A | Hold the screen to talk; rotate the wheel to scroll; press the wheel or swipe down to cancel | ES8311 speaker and ES7243E microphone. Battery voltage and power-off. Keeps Seeed's factory data partition. Experimental |
| Waveshare ESP32-S3-Touch-LCD-1.47 | Hold the screen or BOOT to talk (no microphone, so it reports that); swipe down cancels; USB console for text | No onboard microphone or speaker. Experimental |
| Waveshare ESP32-S3-Touch-AMOLED-1.32 | Hold the screen or BOOT to talk; PWR turns the screen off and on, and a hold powers off on battery | Onboard microphone and speaker. Experimental |
| Waveshare ESP32-S3-Touch-AMOLED-1.43C | Hold the screen or BOOT to talk | Onboard microphones and speaker. Experimental |
| Waveshare ESP32-S3-Touch-AMOLED-1.75 | Hold the screen to talk; lay it face down to sleep (off by default) | Onboard microphones; speaker output |
| Waveshare ESP32-S3-Touch-AMOLED-1.75C | Hold the screen to talk; PWR turns the screen off and on | Onboard microphones and speaker |
| Waveshare ESP32-S3-Touch-AMOLED-1.8 (V2) | Hold the screen or BOOT to talk; PWR cancels | Onboard analog microphone; speaker output |
| Waveshare ESP32-S3-Touch-AMOLED-2.06 (watch) | Hold the screen or BOOT to talk; PWR turns the screen off and on | Onboard microphones and speaker |
| Waveshare ESP32-S3-Touch-AMOLED-2.16 | Hold the screen or BOOT to talk; PWR turns the screen off and on | Onboard microphones; speaker output |
| Waveshare ESP32-S3-Touch-LCD-1.85C V2 | Hold the screen or BOOT to talk | Onboard microphones; speaker output, with a speaker in the speaker-box version |
| Espressif ESP-VoCat v1.2 | Hold the screen or BOOT to talk; swipe down to cancel | Onboard microphones and speaker |
| Waveshare ESP32-S3-Knob-Touch-LCD-1.8 | Hold the screen to talk; the knob scrolls; BOOT also works as TALK | Onboard PDM microphone; no speaker output (the port doesn't drive the headphone DAC; replies are text only) |
| Xorigin AIPI Lite | Hold BOOT to talk; the power key cancels | Onboard microphone and speaker |
| Spotpear ESP32-S3-1.28-BOX | Hold the screen or BOOT to talk; swipe down to cancel | Onboard microphone and speaker; battery |
| Spotpear ESP32-S3-1.54 muma | Hold the screen or BOOT to talk; swipe down to cancel | Onboard microphone and speaker |
| Espressif ESP32-S3-BOX | Hold the screen or BOOT to talk | Onboard microphones and speaker. Experimental |
| Espressif ESP32-S3-Korvo-2 | Hold the screen to talk | Onboard microphones and speaker. Needs the LCD sub-board. Experimental |
| LCDWIKI ES3C28P | Hold the screen or BOOT to talk; swipe down to cancel | Onboard microphone; speaker output. Experimental |
| Espressif ESP32-S3-BOX-3 | Hold the screen or BOOT to talk | Onboard microphones and speaker |
| M5Stack CoreS3 | Hold the screen to talk | Onboard microphones and speaker; battery management |
| M5Stack StickS3 | Hold KEY1 to talk; KEY2 cancels; face-down sleep | Onboard microphone and speaker; battery. Experimental |
| M5Stack StopWatch | Hold the blue key or the screen to talk; yellow cancels; red turns the screen off and on | Onboard microphone and speaker; battery. Experimental |
| LilyGO T-Display-S3 | BOOT and Button2; send text through the USB console | No onboard microphone or speaker |
| Elecrow CrowPanel 2.1-inch HMI | Touch screen and rotary knob; send text through the USB console | No onboard microphone or speaker |
| Elecrow CrowPanel 5.0-inch HMI | Touch screen; send text through the USB console | No onboard microphone or speaker |
| ESP32-S3 breadboard build | Hold the wired TALK button | Wire the microphone and optional speaker |
Classic ESP32 boards
| Board | Controls | Audio |
|---|---|---|
| ESP32-2432S028 CYD (Cheap Yellow Display), two-USB ST7789 revision | BOOT to talk; send text through the USB console | No microphone fitted; a PDM MEMS part on the 4-pin header (PDM clock GPIO 22, data GPIO 27) is driven by the profile. The SC8002B amplifier behind the speaker header plays three boot beeps. The touchscreen is not used |
ESP32-P4 boards
| Board | Controls | Audio |
|---|---|---|
| Elecrow CrowPanel Advanced 10.1-inch ESP32-P4 | Hold the touch screen to talk; BOOT is configured as TALK | Onboard PDM microphone and I²S speaker output; STC8 battery/charger reporting |
| Waveshare ESP32-P4-WIFI6-Touch-LCD-7B | BOOT is configured as TALK; GT911 touch is configured but not yet validated | ES7210 microphone ADC and ES8311 speaker codec; optional OV5647 still capture is experimentally verified |
| Waveshare ESP32-P4-WIFI6-Touch-LCD-3.4C | Hold the touch screen to talk; BOOT is TALK. Touch and audio aren't verified on the board yet | ES7210 microphones and ES8311 speaker; USB power, no battery. Source build only; the C6 needs its own firmware first |
Check the exact model and connections in Hardware and wiring, then follow Set up a board. The browser installer lists profiles included in the latest published release. Newly merged profiles may need a source build until the next release.
Voice needs speech recognition and text-to-speech configured in Hermes. Boards without onboard audio can display replies and accept text through the USB console.
Raspberry Pi
Raspberry Pi 4 and 5 have an experimental Linux client for 64-bit Raspberry Pi OS Lite Trixie. Add USB audio, GPIO controls, or a display as needed. ARM64 release packages include the native core and a service installer.
See the Linux guide for installation and peripherals, and the verification table for testing status.
Other hardware
Other boards need a port. Check the existing wiring and driver support before choosing hardware with a different display, audio codec, or power controller.